Running/Testing

This test example is based on a King Pigeon Industrial CANopen IO Module. Cabling example and documentation are available on Device Store / King Pigeon chapter of the redpesk documentation.

This test example presumes that your device is set to bitrate = 20000 and nod id = 2

Set up device

Set up your can connection with the right can channel (usually can0) and a bit rate corresponding to your device setting (in this case 20000).

sudo ip link set can0 type can bitrate 20000

Open your connection :

sudo ip link set up can0

By default on linux, physical can, TX queue length is 10. But lely lib require a minimum TX queue length of 128. you can set it to 1024 to be safe :

sudo ip link set can0 txqueuelen 1024

Start Sample Binder

Be sure to be in the build directory and run :

afb-binder --name=afb-kingpigeonM150-config --port=1234  --binding=src/lib/afb-CANopen.so --workdir=package --verbose

or if you installed it (from package or with make install)

export CANOPEN_BINDING_DIR=/var/local/lib/afm/applications/canopen-binding
afb-binder \
--name=afb-kingpigeonM150-config \
--port=1234 \
--binding=$CANOPEN_BINDING_DIR/lib/afb-CANopen.so \
-vvv

Test with web UI client

install afb-ui-devtools

open binding UI with browser at http://localhost:1234/devtools/index.html

Test with afb-client

install afb-client

run it :

afb-client --human 'ws://localhost:1234/api'
# you can now send requests with the following syntax : <api> <verb> [eventual data in json format]
# here are some available examples for canopen binding :
canopen ping                                        # Answer pong
canopen info                                        # Return information about the binding and available verbs
canopen slave2/DOUT01 {"action":"write", "data":15} # Write 0b1111 on digital output 01 of slave 2
canopen slave2/DIN01 {"action":"read"}              # Read digital input 01 state of slave 2
canopen slave2/DIN01 {"action":"subscribe"}         # Subscribe to digital 01
...

for more option use afb-client --help

Running python tests

The systeme used with the Kingpigeon M150 to check if analogs inputs and digitals outputs are handled correctly look like this :

Adding your own config

Json config file is selected from afb-binder --name=afb-midlename-xxx option. This allows you to switch from one json config to an other without editing any file. middlename is used to select a specific config. As example --name='afb-kpM15-config' will select canopen-kpM150-myconfig.json.

You may also choose to force your config file by exporting CONTROL_CONFIG_PATH environnement variable. For further information, check AGL controller documentation here

# for exemple :
# $HOME
# └── my-config
#     ├── canopen-myconfig-config.json
#     └── my-master.dcf

export CONTROL_CONFIG_PATH="$HOME/my-config"
afb-binder --name=afb-myconfig --port=1234  --binding=src/lib/afb-CANopen.so --verbose